• (+216) 31 401 372
  • [email protected]
E-Shop
E-Shop

EBS 1500

SEMI sarl > EBS 1500
imgpsh_fullsize_anim (13)
imgpsh_fullsize_anim (14)
Sans-titre-210
Sans-titre-1500
EBS-1500_Slider__3_
EBS-1500_Slider__1_
EBS-1500_Slider__2_

EBS-1500 offers exceptional flexibility in terms of print configuration. Two kinds of drivers, five kinds of 7D (7 nozzles), 16D, 25D, 32D, 64D printheads, having common or stand-alone ink tanks, so that each head can print with different ink color .
The system allows you to increase the size of the print on large products so that the markings can be read even at a long distance – this is possible by combining prints from multiple heads into one large print.
For example, dual 64D heads can achieve characters as high as 232mm.Reasonable purchase price, low power consumption and low consumption of consumables create new quality in large-scale printer segment.

Quote Request
Download brochure
Contact Us

why EBS 1500...

Unlimited configurability

Exceptional flexibility in the configuration of printing systems. Two kinds of drivers, 5 kinds of 7D (7 nozzles), 16D, 25D, 32D, 64D printheads, having common or stand-alone ink tanks, so that each head can print with different ink color.

Ecology and energy efficiency

The low power consumption creates a new quality in the large-scale printer segment, and the economical consumption of consumables gives them a leading position among eco-marking devices.

Increased overall print
height

Increasing print readability on large format products so that markings can be read even from a distance is possible by combining prints from multiple heads into one large print.

IP54 protection

As standard, the printheads and drivers are manufactured in strength class IP54. Depending on the connection cables used, all printing systems can be configured in class IP40 (the cheapest) or IP54.

Application images of EBS 1500

imgpsh_fullsize_anim (49)
kk1
kk2
kk3
kk4
kk5
kk6
kk7

Parameters

Housing stainless steel

Housing dimensions

  • height: 95 mm,
  • width: 300 mm,
  • depth: 237 mm,


minimum width of a compartment for the controller with cables attached: 400 mm

Length of cable from the controller to a first print-head: 3 m as standard

Weight approximately 3350 g (controller with power cord)

IP protection class, printer casing(excluding the printhead) IP40(standard), IP54 (optional)

 

Number of printheads

up to 6


The print-heads depend on each other, i.e. the printing by all print-heads is released by a shared photo-detector and timed by a shared internal generator or an external shaft-encoder.

Working position any

Printhead position during printing any

Terminal 

  • a built-in graphics terminal equipped with an alphanumerical keyboard and LCD graphics display as standard;
  • a multilingual user interface also including the Japanese, Chinese or Korean languages

 

Distance from the printhead to an object from 0 to 30mm

Connections

  • PHOTO (photodetector input)
  • SHAFT (shaft encoder input)
  • RS-232

Required inactive time none, the device can run uninterruptedly for 24 hours

Timing (of all print-heads at the same time) 

  • an internal generator, whose frequency is defined with appropriate print parameters,
  • an external sensor of conveyor travel rate, a shaft-encoder, one to be shared by the print-heads or one for either print-head

 

Type of ink pigmented and non-pigmented, based on methyl-ethyl ketone, acetone or ethanol

Ink color multicolor, provided that ink of one type only is used

*) note –  the manufacturer reserves that:

the range of available features, options and printer parameters may vary and depend on the option you have negotiated

 

Enviroment working temperature from

  • +5 to +40°C (from 41 to +104°F) (as standard)
  • -10 to +40°C (from +14 to +104°F) for special versions
  • relative humidity: up to 90% without condensation

Acceptable exposure to vibration and impacts

  • vibration: max. 1g, max. 10Hz
  • shocks:    max. 1g, max. 2ms

Power supply

  • input rating: AC 87-242V at 45-440Hz, DC 90-350V;
  • power consumption: < 10W for standard version (with no print-head)

 

Maximum power consumption of printing system is conditioned by:

  •  number and types of print-head connected (number of nozzles)
  •  print rate and intensity,
  •  coverage ratio, i.e. the number of dots printed in proportion to the maximum number of dots resulting from multiplying the print length (a number of rows) by the maximum print height

 

Print height  from 5 to a maximum of 115mm (depending on printhead)

Maximum dots 5 to a maximum of 64 (depending on printhead)

Bar codes

  • Datalogic, Matrix, 2/5 5 Bars, Interleaved, Alpha 39, EAN-8, EAN-13, Code 128, EAN-128, Code 128B, ITF8, ITF14.
  • All bar codes can be printed in inversion a preset number of times and supplemented by numerical labels and the width of stripes can be adjusted after changes in ink consistency

Two-dimensional (2D) code Data Matrix ECC-200

Graphics

graphics of any length and the height of up to MPH to be inserted at any point of a text to be printed (a built-in graphics processor)

Number of lines

  • up to 8, if a 7×5-dot matrix is used for a 64-pixel print-head,
  • up to 4, if a 7×5-dot matrix is used for a 32-pixel print-head,
  • up to 3, if a 7×5-dot matrix is used for a 25-pixel print-head,
  • up to 2, if a 7×5-dot matrix is used for a 16-pixel print-head,
  • up to 1, if a 7×5-dot matrix is used for 7 or 12-pixel print-heads

Character size (matrices) 

5×5, 7×5, 9×5, 9×7, 11×8, 12×6, 12×7, 14×9, 16×10, 16×14, 21×15, 25×15, 32×18, 64×36 and others;
various combinations of font types and sizes can be used and are only restricted by the type of print-head or specifically the parameter MPH, the maximum print height

National characters multilingual diacritical characters (also Polish characters), the Cyrillic alphabet, Arabic characters, Japanese characters (Katakana and a set of Kanji characters), Chinese or Korean characters