- Volume : 10 000 à 100 000 + étiquettes / mois
- Coût de l’encre/étiquette : Extrêmement faible
- Type d’encre : colorant
- Vitesse d’impression : rapide
- Largeur maximale d’impression : 216 mm (8,5 po)
- Diamètre maximal du rouleau : 10 po (250 mm)
- The gist: Built for inline integration and high-volume roll-to-roll production. Fast print speed and high image quality. Super-low ink costs.
Powerful in both roll-to-roll and inline applications
Integrates directly with label finishers, applicators, dispensers, and more
The L901 combines industrial design, exceptional image quality, and high production speeds with a new ability to service and maintain the printhead “on-the-fly.”
This makes the L901 perfect for long roll-to-roll print jobs or inline integration with label finishers, applicators, dispensers, and more.
Produce vibrant, full-color prints in high resolution. Large print volumes are now more economical, with five high-capacity 250ml CMYKK ink cartridges delivering an ultra-low cost per label.
L901 Plus with Watershield™ Water-Resistant Inks
The Plus model offers increased water and moisture resistance.
Ask about the L901 Plus for increased water resistanc
Watershield-printed labels are significantly more resistant to the effects of prolonged moisture exposure than conventional dye-based inkjet labels. This makes the L901 Plus perfect for applications such as chilled beverages, foods, chemical or pharmaceutical products.
This new technology also produces deeper blacks, uses more responsibly-sourced inks2, and helps to prolong the life of the printhead3.
1 Water resistance can be media-dependent. Always test your printed label to be sure it meets your requirements.
2 Watershield™ inks do not contain chemicals that are considered to be harmful to humans or the environment.
3 Memjet tested ejection life internally and found an average above 2X printhead life. Actual results may vary due to factors such as environment and frequency of use.
- Inline & high-volume printing
- Fast print speeds (≤ 12 IPS)
- Super low ink costs
- Water-resistant inks available
Roll-to-Roll Label Printing
The XL Unwinder/Rewinder system pairs perfectly with the L901 to allow for continuous, roll-to-roll label production. Easily handle rolls up to 12″ in diameter outside diameter for high-volume jobs and reduced media costs.
Designed for Inline Applications
The L901’s Memjet VersaPass printhead technology allows for on-the-fly maintenance, which makes for perfect inline integration with dispensers, applicators, label finishers and high-volume digital label press configurations.
Ultra-low Ink Cost
Five high-capacity ink cartridges (CMYKK) offer extremely low ink cost per print, a top factor in assessing cost of ownership while choosing a printer. Learn the exact ink cost of your label design.
High Speed & High Resolution
A stationary printhead offers blazing fast print speeds of up to 60 inches (18m) per minute. Keep up with most high-volume jobs, whether in a continuous roll-to-roll setup or inline with a digital press.
Printer | |
|---|---|
| Print method: | Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips – 70,400 nozzles (6,400 per IC Chip) |
| Inks: | Dye-based, 250mL CMYKK cartridges (1.25L total) — Watershield water-resistant formula available |
| Print resolution: | 1600×1600 dpi to 1600×800 dpi |
| Print speed: | 6″–12″ per second (152mm–305mm) |
| Print width: | 8.5″ (216mm) |
Media | |
| Media types: | Compatible with a range of paper, polyester, polypropylene, and vinyl label stocks |
| Media width: | 2″–9″ (50.8mm–229mm) |
| Media length: | 2″–40″ (50.8mm–1016mm) |
| Thickness: | 0.005″-0.01″ (0.13mm–0.3mm) including liner |
| Maximum roll diameter: | 10″ (250mm) with XL Unwinder/Rewinder System |
| Core diameter: | Requires 3″ (76.2mm) cardboard core |
| Media sensors: | Gap (movable), continuous, black mark |
| Die-cut label gap: | Minimum 0.125″ (3.0mm) Maximum 0.3″ (8.0mm) |
| Black mark: | 0.125″ (3mm) wide, 1″ (25.4mm) long, Left side position |
General | |
| Cutter/sheeter: | Powered |
| Interfaces: | USB 2.0, TCP/IP (Manual IP configuration or DHCP), GPIO available for external device control |
| Operating system: | Windows 7+ (32 and 64 bit) |
| Barcode font: | 1D Barcode at least Grade B (Code39) with 10mils bar width |
| Two-dimensional code printing: | 2D Barcode at least Grade B (PDF417) with 10mils cell size |
| Operating temperature: | 59°–95°F (15°–35°C) at RH 20–80% |
| Storage temperature: | 23°–113°F (-5°–50°C) at RH up to 85%, non-condensing at 65° |
| Overall dimensions: | 18.9″ (480mm) W, 19″ (485mm) D, 21.1″ (535mm) H |
| Weight: | 85 lbs. (38.5kg) |
| Rated voltage: | AC 110V – 220V, auto-sensing |
| Rated frequency: | 50–60Hz |
| Agency Certifications | CE, FCC, UL |
| Warranty: | One year |
| Afinia part numbers: | L901 Standard L901 Printer: 29698 Black Ink: 26730 Cyan Ink: 26723 Magenta Ink: 26716 Yellow Ink: 26709 L901 Plus (Watershield™) L901 Plus Printer: 32344 Black Plus Ink: 30461 Cyan Plus Ink: 30454 Magenta Plus Ink: 30447 Yellow Plus Ink: 30440 |
| Accessories: | XL Unwinder: 26681 XL Rewinder: 28802 |